| Trapezoidal sheet T-35 the best product category. It contains many types of coatings in the category of Trapezoidal sheet T-35. We invite you to familiarize yourself with the rest www.nadach.com offer an online store, which will contribute to a significant reduction in price of a complete roof. Roofing recommended by us are characterized by low prices and quality and unusual appearance, because we had the opportunity to verify them during long-lasting roofing practices. Build your roof with us and you will understand what it means to the satisfaction using the relevant material in the right price. Greetings to you - shop for building materials and roof covering - www.nadach.com.
ALUCYNK - this is a steel sheet coated with aluminum and zinc alloy with an addition of silicon. Aluminium and steel substrate bund protects the surface from the atmosphere. This barrier is very stable, because it creates on the surface layer of aluminum oxide is insoluble in most environments, which provides long-term corrosion resistance. Zinc and provides the same protection as in the case of galvanized steel where the steel substrate is uncovered. In practice, instead of steel, corrosion is zinc, which is known as cathodic protection. The combined effect of the protective mechanisms of aluminum and zinc gives the blachom better properties than is the case with steel plate protected, only zinc or aluminum only. This type of steel also has a thin coating called organic. Easyfilm, which maintains and enhances the aesthetics of the temporary protection of material during transport and storage.
Zinc - this type of plate is hot dip galvanized on both sides in a continuous process, which protects against corrosion of the steel core. Zinc is a metal resistant to corrosion. Its characteristic is to move around the surface of the sheet, when it spontaneously cover all scratches. In addition, the zinc coating is formed pellet with special characteristics - himself a product of corrosion, but against its progress.
POLIESTER STANDARD - This type of coating is applied to the galvanized steel sheet not less in weight as 275 g/m2. The thickness of the organic top layer in this case is 25 mm. Its appearance is characterized by the smoothness and gloss. Available colors are determined in accordance with RAL color palette.
POLIESTER MAT - in this case, the thickness of the upper organic coating is 35 microns. As in the case of Standard Polyester sheet is applied on the coated material at a minimum weight of 275 g/m2. The distinguishing feature of this type of film is its deep matt appearance from every angle. |
|
